Small size, easy to carry
Size: about 7x4x2cm/2.75x1.57x0.78\'\'
Calibrating film: 0.1mm 0.25mm 0.5mm 1mm 2mm
Battery: 3V button battery (without battery)
User Manual Languages: English
Measurement range: 0.0 to 2.0 mm, 0 mil to 80 mil
Accuracy: 2%rdg +/- 0.1 mm, or 2%rdg+/- 4 mil
Resolution:0.1 mm/1 mil
Power supply: 1 x 3 V button cell, CR2032 or equivalent,
Measuring technology: Magnetic
Weight: About 23 grams (not including button cell)
Before measurement, place the tester with its probe firmly against target surface.
3. "TEST" button
A. Press "TEST" button to turn on the tester. Press and h old down this button for about 1 second to turn off the tester.
B. Press "TEST" button to delete the reading on the display,the display will show "- -".
4. "UNIT" button
Press this "UNIT" button to select desired unit: mm or mil.
The upgrated EM2271. It can measure the Fe & NFe. Accuracy improved, measurement range extended, resolution higher, better cost-efficiency.
Please don\'t use this device under 0 degrees Celsius !
Note: The working accuracy of the system is at 23℃+/- 5℃, and the relative humidity is less than equal 80%.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand.
1 x Painting Thickness Tester(not including button cell)
5 x Sheet Adjustments
1 x User Manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.